Jump to content

Methyl acetate

From Wikipedia, the free encyclopedia
(Redirected from Methylacetate)
Methyl acetate[1]
Skeletal formula of methyl acetate
Ball and stick model of the methyl acetate molecule
Names
Preferred IUPAC name
Methyl acetate
Systematic IUPAC name
Methyl ethanoate
Other names
Methyl ester of acetic acid
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.001.078 Edit this at Wikidata
KEGG
UNII
  • InChI=1S/C3H6O2/c1-3(4)5-2/h1-2H3 checkY
    Key: KXKVLQRXCPHEJC-UHFFFAOYSA-N checkY
  • InChI=1/C3H6O2/c1-3(4)5-2/h1-2H3
    Key: KXKVLQRXCPHEJC-UHFFFAOYAV
  • O=C(OC)C
Properties
C3H6O2
Molar mass 74.079 g·mol−1
Appearance Colorless liquid
Odor Fragrant, fruity[2]
Density 0.932 g cm−3
Melting point −98 °C (−144 °F; 175 K)
Boiling point 56.9 °C (134.4 °F; 330.0 K)
~25% (20 °C)
Vapor pressure 173 mmHg (20°C)[2]
-42.60·10−6 cm3/mol
1.361
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability (yellow): no hazard codeSpecial hazards (white): no code
2
3
Flash point −10 °C; 14 °F; 263 K[2]
Explosive limits 3.1%-16%[2]
Lethal dose or concentration (LD, LC):
3700 mg/kg (oral, rabbit)[3]
11,039 ppm (mouse, 4 hr)
21,753 ppm (cat, 1 hr)
32,000 ppm (rat, 4 hr)[3]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 200 ppm (610 mg/m3)[2]
REL (Recommended)
TWA 200 ppm (610 mg/m3) ST 250 ppm (760 mg/m3)[2]
IDLH (Immediate danger)
3100 ppm[2]
Safety data sheet (SDS) External MSDS
Related compounds
Related esters
Methyl formate
Ethyl acetate
Ethyl formate
Methyl fluoroacetate
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Methyl acetate, also known as MeOAc, acetic acid methyl ester or methyl ethanoate, is a carboxylate ester with the formula CH3COOCH3. It is a flammable liquid with a characteristically pleasant smell reminiscent of some glues and nail polish removers. Methyl acetate is occasionally used as a solvent, being weakly polar and lipophilic, but its close relative ethyl acetate is a more common solvent being less toxic and less soluble in water. Methyl acetate has a solubility of 25% in water at room temperature. At elevated temperature its solubility in water is much higher. Methyl acetate is not stable in the presence of strong aqueous bases or aqueous acids. Methyl acetate is not considered a VOC in the USA.[4][5]

Preparation and reactions

[edit]

Methyl acetate is produced industrially via the carbonylation of methanol as a byproduct of the production of acetic acid.[6] Methyl acetate also arises by esterification of acetic acid with methanol in the presence of strong acids such as sulfuric acid; this production process is famous[according to whom?] because of Eastman Kodak's intensified process using a reactive distillation.

Reactions

[edit]

In the presence of strong bases such as sodium hydroxide or strong acids such as hydrochloric acid or sulfuric acid it is hydrolyzed back into methanol and acetic acid, especially at elevated temperature. The conversion of methyl acetate back into its components, by an acid, is a first-order reaction with respect to the ester. The reaction of methyl acetate and a base, for example sodium hydroxide, is a second-order reaction with respect to both reactants.

Methyl acetate is a Lewis base that forms 1:1 adducts with a variety of Lewis acids. It is classified as a hard base and is a base in the ECW model with EB =1.63 and CB = 0.95.

Applications

[edit]

A major use of methyl acetate is as a volatile low toxicity solvent in glues, paints, and nail polish removers.

Acetic anhydride is produced by carbonylation of methyl acetate in a process that was inspired by the Monsanto acetic acid synthesis.[7]

See also

[edit]

References

[edit]
  1. ^ Merck Index, 12th Edition, 6089.
  2. ^ a b c d e f g NIOSH Pocket Guide to Chemical Hazards. "#0391". National Institute for Occupational Safety and Health (NIOSH).
  3. ^ a b "Methyl acetate". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  4. ^ Zeno, W. Wicks, JR, Frank N. Jones, S. Peter Pappas, and Douglas A. Wicks (2007). Organic Coatings. Hoboken, New Jersey: Wiley. ISBN 978-0-471-69806-7.{{cite book}}: CS1 maint: multiple names: authors list (link)
  5. ^ "Update: U.S. EPA Exempt Volatile Organic Compounds". American Coatings Association. 2018-01-30. Retrieved 2019-03-20.
  6. ^ Hosea Cheung, Robin S. Tanke, G. Paul Torrence “Acetic Acid” in Ullmann's Encyclopedia of Industrial Chemistry, 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a01_045
  7. ^ Zoeller, J. R.; Agreda, V. H.; Cook, S. L.; Lafferty, N. L.; Polichnowski, S. W.; Pond, D. M. (1992). "Eastman Chemical Company Acetic Anhydride Process". Catalysis Today. 13: 73–91. doi:10.1016/0920-5861(92)80188-S.